Pick the pressure, connect to the valve, done: the inflator fills or deflates until the value is right – then beeps. For forecourts, workshops, fleets and cyclists. We supply the unit, treat the compressed air, install and maintain.
Low tyre pressure costs fuel, rubber and nerves. Our units only cost you once.
At a charging park, drivers stand next to their car for 20 minutes or more – the perfect moment to check tyre pressure. Electric cars are heavy, and the right pressure directly affects range and tyre wear.
The ALF-Tower ELK brings its own compressor: all it needs is a power connection – no air line, no separate compressor room. Fully automatic, built for outdoor use and optionally with contactless payment – an extra service that upgrades the charging park and pays for itself. Also ideal for motorway services, hotels, shopping centres and car parks.
ALF-Tronik is a fully automatic tyre inflator: set the target pressure with + and –, the large display shows target and actual pressure side by side. Connect to the valve – the unit fills or deflates until the value is right and signals with a beep.
Even a completely flat tyre is no problem: the “empty tyre” function first builds back-pressure with three air pulses. For the second tyre on the same axle the value stays stored for two minutes, then the unit returns to 2.00 bar by itself. It re-zeroes automatically every hour – so the display is still right years later.
| ALF-Tronik Forecourt | ALF-Tronik Workshop | |
|---|---|---|
| Design | Tower (H 1520 mm) or wall unit | Wall unit |
| Wall unit (H × W × D) | 350 × 300 × 130 mm | 350 × 300 × 130 mm |
| Max. inflation pressure | 10 bar / 145 psi | 10 bar / 145 psi |
| Accuracy | < 0,08 bar | < 0,08 bar |
| Air supply | max. 16 bar | max. 16 bar |
| Hose length | 8 m | 8 m |
| Power | 230 V, max. 18 VA | 230 V, max. 18 VA |
| Protection / use | IP45, indoor and outdoor | IP45 |
| Temperature | −10 … +40 °C | −10 … +50 °C |
| “Empty tyre” function | ✓ | ✓ |
| Bead-seating pressure | – | ✓ |
| Nitrogen purge cycles | – | ✓ |
| Payment system | optional coin / contactless | – |
| Type examination | PTB DE-25-M-PTB-0036 | PTB |
Fully automatic tyre inflator: forecourt (tower or wall, optional coin/contactless), workshop with bead-seating pressure and nitrogen purge, workshop 3000 and OEM.
Tyre inflation tower for the forecourt – electronic (EL) or analogue (AL), also with built-in compressor (ELK, ALK) for sites without a compressed-air network, e.g. EV charging parks.
The tower for heavy vehicles – for truck stops, hauliers and depots.
Stationary wall unit in two pressure ratings – robust and simple.
The classic for on the go: mobile inflator with its own air tank – ideal where there is no air line. It is refilled at our PetroAir tower.
Mobile inflator in two pressure ratings.
Handheld unit in two pressure ratings.
For pressure checks, also available as Flex.
Tyre inflator for bicycles – a nice extra at your station, especially along cycle routes.
Electronic inflator for sports balls.
Ball inflator with built-in 12 V compressor.
An electronic inflator is only as good as the air it gets. We check your site and deliver everything from one source:
A tyre inflator works reliably for years – if it gets a little attention now and then. We take care of it, on request as part of a maintenance contract:
For ALF-Tronik yes – with a service unit and air dryer so no water gets into the unit. Without a network there is the ALF-Tower with built-in compressor. We check your system on site.
Tell us who fills up on air at your place and whether compressed air is available – you'll get a quote including installation. Rather talk? +41 71 973 75 75.
Request a quote